2008年2月25日消息，Ethernet Direct推出JME－2408-L2+ Enterprise Workgroup 交換機，帶有24 10/100TX接口和2個吉比特銅/SEP接口用于外部靈活性。 JME-2408-L2+是一個高性能WEB管理型L2＋交換機，跟據不同的應用，可與24 10/100TX以太網接口或是2 combo吉比特接口一起安裝，在用戶帶來更多的靈活性。此外，SFP纖維無線收發器支持熱的即插即用功能，在交換機處于工作狀態時，用戶可插入或移換SFP纖維收發器。 JME-2408-L2+為無扇設計，不僅可以減少功率損耗，還能最小化操作噪音。JME-2408-L2+擁有前端訪問設計，允許用戶通過前端面板上的內置液晶顯示器查看交換機狀態。管理者可在rack-mount環境中對其進行檢查、故障檢修和維護。 JME-2408-L2+還擁有許多管理特點，包括基于端口/基于標簽的VLAN，SNMP功能，RSTP（快速生成樹協議），MSTP（多生成樹）、IGMP、GVRP及更多協議。為了提高帶寬應用，JME-2408-L2+支持高達7個樹干組，每一個樹干能夠調節以適應4個會員端口。這些樹干端口提供交換機與交換機之間或是交換機與服務器間的帶寬。 JME-2408-L2+擁有很高的精確度，在JME-2408-L2+上可執行Layer2+分類。有256個訪問控制表規則可以被設定，使用戶可以過濾或是選擇一些用于安全管理或授權控制的數據包。管理者因此也可設置IP或MAC地址以防止未授權訪問。為加強安全性，JME-2408-L2+支持在IEEE 802.1x上的三種鑒定，包括MD5,TLS和REAP。 關鍵特征如下： 1. 32 bit ARM9 CPU, 16MB SDRAM, 4Mb packet buffer 2. Non-blocking, full-line speed, store-and-forward operation 3. Support jumbo frame up to 9K byte in packet length 4. Auto-Negotiation and Auto-MDIX on all 10/100M or 10/100/1000M copper ports 5. 24 10/100 RJ-45 ports, and 2 pair Gigabit ports of RJ-45 and SFP 6. 8K+256 MAC entries, 4K VLAN entries and 1K multicast Entries 7. Support flow control on both half and full duplex operation 8. Support Head-of-Line blocking prevention 9. Support port-based VLAN and 802.1Q tag-based VLAN 10. Support IEEE 802.1x MD5, EAP, TLS 11. Support IP Multicast, IGMP snooping, GVRP 12. Support RSTP （ Rapid Spanning Tree Protocol, IEEE 802.1w ） 13. MSTP （ Multiple Spanning Tree, RSTP included ）, Spanning Tree protocol used for VLAN environment 14. Support 4-level priority queuing 15. Support Port-Trunking with flexible load balancing algorithm 16. Provide 7 trunk groups with up to 4 member ports within 24 ports 10/100M ports 17. Support ingress port security mode 18. Support port-based Egress and Ingress rate limit control 19. Support RMON group 1,2,3,9 20. Support SNMP V1/V2/V3 21. Support DHCP option 82 22. Support ACL （Access Control List） up to 256 rules 23. Support Port mirroring 24. Field-code-upgradeable 25. Support in-band control （any one of Ethernet ports） 26. Support high speed out-of-band control （115,200 baud rate） 27. LED display for each port status: link, activity and speed [FONT=times] original text [/FONT] [font=times][Color=#708090]Taipei, Taiwan, February 25, 2008 – Ethernet Direct released JME-2408-L2+ Enterprise Workgroup Switch with 24 10/100TX ports and 2 Gigabit copper/SFP ports for media flexibility. JME-2408-L2+ is a high-performance web managed layer 2+ switch. It is equipped with 24 10/100TX Ethernet ports and 2 combo Gigabit ports, giving users more flexibility in constructing gigabit backbone with either copper or fiber media for different applications. In addition, SFP fiber transceivers support hot pluggable function, enabling users to insert or swap SFP Fiber transceivers when the switch is powered on. JME-2408-L2+ has fanless design, which not only reduces the power consumption, but also minimizes operation noise. JME-2408-L2+ also has a front-access design, which allows users to see a switch’s status with the built-in LED on the front panel. It makes it easy for administrators to easily inspect, trouble-shoot, and maintain switches in a rack-mount environment. JME-2408-L2+ also has many management features, including port-based/tag-based VLAN, SNMP function, RSTP （Rapid Spanning Tree）, MSTP （Multiple Spanning Tree）, IGMP, GVRP, and more. To increase bandwidth application, JME-2408-L2+ supports up to 7 trunk groups, and each trunk can accommodate up to 4 member ports. These trunk ports provide aggregated bandwidth between switches or between the server and the switch. JME-2408-L2+ has strong security features as well. Layer2+ classification is implemented in JME-2408-L2+. There are up to 256 Access Control List rules can be configured, enabling users to filter or to select some packets for security management or authorized control. Administrators can therefore set up IP or MAC address to prevent unauthorized access. And to enhance security, JME-2408-L2+ support 3 kinds of Authentication on IEEE 802.1x, including MD5, TLS, and REAP. Key Features 1. 32 bit ARM9 CPU, 16MB SDRAM, 4Mb packet buffer 2. Non-blocking, full-line speed, store-and-forward operation 3. Support jumbo frame up to 9K byte in packet length 4. Auto-Negotiation and Auto-MDIX on all 10/100M or 10/100/1000M copper ports 5. 24 10/100 RJ-45 ports, and 2 pair Gigabit ports of RJ-45 and SFP 6. 8K+256 MAC entries, 4K VLAN entries and 1K multicast Entries 7. Support flow control on both half and full duplex operation 8. Support Head-of-Line blocking prevention 9. Support port-based VLAN and 802.1Q tag-based VLAN 10. Support IEEE 802.1x MD5, EAP, TLS 11. Support IP Multicast, IGMP snooping, GVRP 12. Support RSTP （ Rapid Spanning Tree Protocol, IEEE 802.1w ） 13. MSTP （ Multiple Spanning Tree, RSTP included ）, Spanning Tree protocol used for VLAN environment 14. Support 4-level priority queuing 15. Support Port-Trunking with flexible load balancing algorithm 16. Provide 7 trunk groups with up to 4 member ports within 24 ports 10/100M ports 17. Support ingress port security mode 18. Support port-based Egress and Ingress rate limit control 19. Support RMON group 1,2,3,9 20. Support SNMP V1/V2/V3 21. Support DHCP option 82 22. Support ACL （Access Control List） up to 256 rules 23. Support Port mirroring 24. Field-code-upgradeable 25. Support in-band control （any one of Ethernet ports） 26. Support high speed out-of-band control （115,200 baud rate） 27. LED display for each port status: link, activity and speed[/color][/font]