擁有完整傳送器的溫度傳感器已日益成為抵擋劇烈工作條件的選擇。丹佛斯推　的結實耐用的MBT3560被證明可以應對惡劣的工作環境，甚至是鉆井行業中極端的環境。 快速、可靠和耐用是MBT3560為用戶提供的最實用的優勢，幫助他們找尋更多穩定的電氣信號。 傳統地，Pt100傳感器被應用在需要改變電氣信號的地方，但是一些移動的水力應用對穩定要求更高，線性信號輸出比Pt100更好管理。這也正是丹佛斯MBT3560非常有用的地方。這款緊湊的傳感器可以抵擋劇烈的振動，成為丹佛斯最耐用的產品之一。 集成在電子器件中可以加強電氣信號可提供以下優勢： 1　電流信號可以不受電壓干擾通過長距離可以被傳送; 2　使用具備標準的4-20mA信號輸入卡通過減少庫存節省成本; 3　配線的減少同時降低了安裝成本，僅需要二線制系統； 4　不存在線損 兩根線接錯的風險可由保護極排除。 溫度測量范圍為-50℃到+200℃，由于傳感器的創新設計MBT3560可以大幅度降低反映時間。真正耐熱的溫度傳感器。 德國鉆井系統生產商Tracto-Technik選擇的便是MBT3560，為新的水平鉆孔系統提供有效的測溫方法。該公司評價說MBT3560在鉆軸運行時，導致的問題很少，對掌舵的操作也不需很精確，尤其在換工具時。液壓油變化的油溫導致的粘性變化使系統的傳輸很困難，用MBT3560則方便許多。 MBT3560被專門用于重型設計，需要快速反映時間和簡單的4-20mA電流信號處理中。 [FONT=times] original text [/FONT] [font=times][Color=#708090]Temperature sensors with integrated transmitters are increasingly being used in applications where they must be able to withstand intense working conditions. Danfoss’ robust MBT 3560 is proving to be up to the challenge – even in the extreme environment of the drilling industry. A temperature sensor that really can stand the heat Fast, reliable, and long-lasting – the MBT 3560 offers real advantages to end-users seeking a more stable electrical signal。 Traditionally, Pt100 sensors have been used in applications where there was a need to transform the temperature into an electrical signal. But some mobile hydraulic applications require a more stable and linear output signal than Pt100 sensors can manage. And that is where Danfoss’ MBT 3560 comes into its own. This compact sensor can withstand intense vibrations, making it one of Danfoss’ most reliable products. But it is its integrated electronics, which acts to enhance the electrical signal. The current signal can be conveyed to evaluation electronics across long distances without voltage interference. MBT 3560 apart, delivering the following advantages: • The use of input cards with the standard signal 4-20 mA saves costs through reduced stock. • Installation costs are saved through reduced wiring, as only a 2-wire-system is necessary. • No wire compensation – • The risk of mistaking the two wires is eliminated through protection of the poles. Capable of measuring temperatures from -50oC to +200oC, the MBT 3560 also offers a considerably reduced response time thanks to a new and innovative design of the sensor. When German drilling system manufacturer Tracto-Technik needed an efficient way to determine oil temperature on a new horizontal drilling system, it turned to the MBT 3560. The company had found that the slow, precise steering needed when drilling shafts led to problems, particularly when changing tools. The varying temperatures of the hydraulic oil leads to changes in viscosity which in turn makes it hard to control the system’s transmission. The solution was the MBT 3560, which was chosen for its heavy-duty design, fast response time and simple processing of the 4-20mA current signal. [/color][/font]